Binder is an expert for gas applications –
Especially for biogas, digester gas, gases from landfills and syngas!
In addition to industry, the main market segment is the sewage treatment plant sector, in which we have been able to gather experience over decades in the gas sector for quantitative and qualitative measurement.
Today, we also supply air flow meter and control valves for the biological treatment stage as well as control concepts for load-depending air supply and air distribution for process optimization and energy saving.
Other core applications are gases in landfills, solid waste treatment plants, agricultural biogas plants, plants with anaerobic pre-treatment of organically highly loaded industrial sewage e.g. from food industry and plants with wood gasification, for which we have developed very special combinations of gas flow measurement and analysis according to market demands.
Gas analysis and gas flow measurement
Application areas
Thermal mass flow meter & conditioner for industrial applications
All COMBIMASS® gas flow meter use thermal dispersion technology. They measure in dry gases directly the standard volumetric flow rate according to DIN 1343. Thermal mass flow meter are very precise, compared to other availabble technologies, especially precise at low gas speed and low gas pressure. Flow conditioner and flow profile measurements at site during start-up can help to decrease deviations due to unfavorable pipe run.
Flow Measurement and Analysis of Biogas
Binder manufactures biogas flow meter with integrated humidity compensation for small as well as big biogas plants, to monitor annual biogas production (manipulation-safe) and analyzer for Monitoring and optimization of biological processes. One Typical application is the H2S-filter monitoring upstream to the use in CHP´s.
Flow measurement and analysis of digester gas, gas from landfills, from dry fermentation and digestion of industrial sewage
COMBIMASS® gas flow meter have been used successfully worldwide for decades. They are used both directly at the gas production site as well as in the consumption in front of CHP’s, boiler and flares for quantitative recording. For several years Binder has also been offering gas quality measurement with mobile or stationary Solutions.
Flow measurement and analysis of syngas
Für den Bereich Synthesegas bietet Binder ein Kombigerät zur Gasmengenmessung mit integrierter H2-Kompensation an. Sind die Anforderungen an die Genauigkeit hoch, kann durch die Nutzung einer Gasanalysestation mit genauer Erfassung der Gasqualität die Genauigkeit der Gasmengenermittlung verbessert werden.
Analysis of gases containing methane
Portable and stationary analyzer complete the flow meter of COMBIMASS® series like a further component. The instruments are used in the field of agricultural biogas, digester gas, gas from landfills and composting plants as well as syngas from wood gasification.
Combining COMBIMASS® biogas flow meter and analyzer accuracy of flow reading can be improved, if gas composition is changing in time. All COMBIMASS® analyzer stations offer automatic compensation of changing gas composition.
Control valves for aeration air
Almost all VACOMASS® control valves were developed and optimized especially for aeration air for the use in activated sludge tanks, grit chamber and exhaust air treatment. All of them close bubble-tight and can be combined customized with different makes and types of actuator and fulfill requirements of the advisory leaflet DWA-M 229.
Tank blanketing and inerting
Tanks and containers, like single tanks, large tanks, pre-, intermediate, final product, agitated and reaction vessels, different kinds of the centrifuges and decanters and many further process tanks and container must be inertized. This inertization is operated usually at pressure conditions close to the ambient pressure, so that the containers are often exposed only to small pressure loads.
CAMASS® Calibration Lab
Beim Einsatz technologisch hochentwickelter Systeme zur Messung und Analyse von Gasen wird die Kalibrierung zum entscheidenden Erfolgsfaktor. Zur Erzielung bestmöglicher Genauigkeiten wird jedes COMBIMASS® und jedes VACOMASS® flow meter im CAMASS® Kalibriertechnikum unter Simulation der realen Betriebsbedingungen exakt kalibriert.
BETA Pressure and Temperature Switches
There are a few switches for industry only which fit to such a wide range of applications like BETA pressure and temperature switches. High quality switches which fulfill required specifications can be supplied practically for each branch and industry. They are available in more than 10 million versions.
Control systems for air supply and distribution
Almost all VACOMASS® control valves were developed and optimized especially for aeration air for the use in activated sludge tanks, grit chamber and exhaust air treatment. All of them close bubble-tight and can be combined customized with different makes and types of actuator and fulfill requirements of the advisory leaflet DWA-M 229.
Air and exhaust air analysis
Portable and stationary analyzer complete the flow meter of COMBIMASS® series like a further component. The instruments are used in the field of agricultural biogas, digester gas, gas from landfills and composting plants as well as syngas from wood gasification.
Combining COMBIMASS® biogas flow meter and analyzer accuracy of flow reading can be improved, if gas composition is changing in time. All COMBIMASS® analyzer stations offer automatic compensation of changing gas composition.