Using the COMBIMASS® hot tapping unit, the flowmeter can be removed gastight during operation for check and maintenance. It is available in three different sizes for sensors 12, 18 and 25 mm.
• flow sensor can be removed during operation gastight
• removal also at higher temperatures and gas pressures possible
• ball valve also with DVGW-approval available
• compact, rugged, reliable, without wear and corrosion-proof
• easy installation and maintenance
Using the COMBIMASS® hot tapping unit, the flowmeter can be removed gastight during operation for check and maintenance. It is available in three different sizes for sensors 12, 18 and 25 mm.
COMBIMASS® eco
The COMBIMASS® eco is a thermal gas flow meter with a customized calibration range for sewage and landfill gas. It measures in dry gases the gas flow rate directly at standard pressure and temperature according to DIN 1343 and can be used both of gas production and consumers.
COMBIMASS® eco-bio+
Precondition for a reliable, precise and reproducable measurement of biogas is the determination of flow rate at standard conditions. All instruments of COMBIMASS® eco-bio+ series use thermal dispersion technology and determine the volumetric flow rate at standard pressure and standard temperature directly. Waterdamp portion must be compensated only, to measure flow rate at standard conditions according to DIN 1343.
COMBIMASS® multi
A COMBIMASS® multipoint system allows precise measurements of flow rate of pressurized air and technical gases even with short inlet and outlet pipe sections, nominal diameters larger than DN 500 or rectangular ducts. In such situations flow profile distortions may occur, which normally lead to errors in flow metering of gases.
COMBIMASS® eco
The field transmitters of the COMBIMASS® eco series are suitable for gas flow measurement and cover a wide range of different applications. The flow transmitters apply thermal dispersion technology in order to measure directly in dry gases the standard volumetric or gas mass flow according to DIN1343, regardless of the operating pressure and temperature of the medium. The instruments can be employed for process temperatures up to 220°C and are available in explosion proof versions. COMBIMASS(R) convert transmits all data to the main PLC using all common types of communication. Inline measuring systems enable accurate measurements even in very small pipelines and at high pressures. A special version is the COMBIMASS® eco hydrogen, which with its FC6 technology enables accurate and reliable measurements even in pure hydrogen.
COMBIMASS® basic
The field transmitters of the COMBIMASS® series are suitable for flow rate measurement of compressed air and technical gases at medium temperatures up to 130°C. The flow transmitters apply thermal dispersion technology in order to measure in dry gases directly the normal volumentric or gas mass flow, regardless of the operating pressure and temperature of the medium. COMBIMASS(R) convert transmits all data to the main PLC using all common types of communication.
COMBIMASS® AL100 / SS100
The field transmitters COMBIMASS® AL100/ SS100 are suitable for flow rate measurement of compressed air and technical gases at medium temperatures up to 130°C. The flow transmitters apply thermal dispersion technology in order to measure directly in dry gases the normal volumentric or gas mass flow, regardless of the operating pressure and temperature of the medium (DIN1343). Additional signal inputs and outputs can be used for simultaneous correction of signals, if flow profile or gas composition change during operation. COMBIMASS® convert transmits all data to the main PLC using all common types of communication.
Service & Support
For more information, please contact us:
Falls Sie Fragen zum Produkt haben, bitte kontaktieren Sie uns:
Binder Engineering GmbH
Tel +49 731 96826-0
support@bindergroup.info